|
#660 Superbear
The #660 Superbear is a #330 body grip trap
modified to a 26" width using solid 1/2"
steel welded to a #330 trap frame. The 1/2"
rods are drilled to 5/16 and the frame ends
of the 330 are inserted into these holes
before welding. This makes for an extremely
strong trap that will not flex or bend in
the center of the jaws.
The dog is laser cut to fit the 1/2" rods.
Finally a machined trigger is installed on
the trap. Trigger wires are attached via a
nut and bolt allowing wires to be replaced
in the field. The triggers are in the T
configuration to completely cover the wide
trap opening.
The 660 has been used for 7 years with
outstanding results from all over the
country. It allows fencing of wide gaps
quickly and easily without spooking beaver.
Dam crossings, feeder creeks, and riverside
channels are just some of the possibilities
with the 660. Body trap shy beaver can be
caught with ease in the 660, making it a
fine ADC tool . Once you begin to utilize
the 660s capabilities, you will find
yourself using them in place of foothold
traps. Anytime you can 660 a beaver its time
saved for you not having to mess with slide
wires , sprung traps & misses!
Many otter trappers are using the 660 with
great success. Most otter are suitcase
caught in fine pelt condition. Add a few
660's to your otter bag of tricks when a
wide trap is in order.
$39.50/Each 4 Traps
$148
|
